Chillax’R Eco Nest Wood-Fired Hot Tub

PRE ORDERS - DELIVERY MIDDLE OCTOBER

A simple, affordable off-grid wood-fired hot tub designed for glamping sites, campsites, holiday lets and outdoor living.

The Chillax’R Eco Nest combines a sociable compact design with low-maintenance simplicity, creating the perfect wood-fired hot tub experience without the need for electricity.

SPECIFICATIONS

• 1500mm Diameter
• 650mm Deep
• Recycled composite cladding with stainless steel rim
• Insulated floor
• Quality stainless steel wood-fired burner with ash pan
• Paddle included
• Thermometer included
• Thermal bubble cover included

OPTIONAL EXTRAS

• Stainless steel chimney and lid package + £329

PERFECT FOR

• Glamping sites
• Campsites
• Holiday lets
• Small gardens
• Off-grid living

No electricity required.
Easy to use.
Designed for outdoor relaxation.

INSTALLATION, OPERATING & SAFETY GUIDELINES

BEFORE USE

Please read these guidelines carefully before installing or operating your Chillax’R Wood-Fired Hot Tub.

• The hot tub must be installed outdoors on a firm, level and adequately supported surface.
• Take extra care when installing on grass or gravel, as these surfaces may settle.
• The tub and burner must be positioned on the same level surface.
• Ensure both circulation pipes are correctly aligned, securely connected and free from blockages.
• Never alter or force the angle of the circulation pipes.
• Check that all clamps and connections are securely tightened before filling.

INSTALLATION

1. Position the Tub & Burner
   Place the tub and burner on the same firm, level and supported surface.
2. Connect the Burner
   Connect both stainless-steel pipes from the burner to the tub fittings using the supplied short hoses. Securely tighten both clamps.
3. Fit the Ball Valve
   Fit the ball valve to the pre-drilled hole at the bottom of the tub. Ensure the valve is securely fitted and CLOSED before filling.
4. Fill the Tub Before Lighting
   Fill the tub until the water level is above the upper circulation pipe.

IMPORTANT: NEVER LIGHT THE BURNER WITHOUT SUFFICIENT WATER IN THE TUB.

The water must remain above the upper pipe for the entire time the fire is burning or while the burner remains hot.

LIGHTING & HEATING

1. Close the ball valve and fill the tub above the upper circulation pipe.
2. Place the thermal bubble cover directly onto the water with the bubbles facing down.
3. If using the burner without an ash pan, place firelighters and kindling inside, light and allow the kindling to catch before adding larger logs.
4. If using an ash pan, light the firelighters in the tray, close it, and add kindling and logs as the fire establishes.
5. Add dry wood as required.
6. Stir the water every 20–30 minutes to help distribute heat and speed up heating.
7. Take care when heating, as very hot water or steam may escape from the upper circulation pipe.
8. Once the desired temperature is reached, stop adding wood and allow the fire to go out before entering the tub.

IMPORTANT SAFETY INFORMATION

• NEVER operate the burner without the tub being filled above the upper circulation pipe.
• NEVER drain the tub while the fire, burner or embers are hot.
• The burner and circulation pipes become extremely hot during use. Keep children, pets and combustible materials well away.
• Never leave a burning fire unattended.
• Never block, restrict or disconnect either circulation pipe while the burner is operating.
• Do not use the hot tub if any pipe is blocked, loose, leaking or damaged.
• Allow the fire, burner and embers to cool completely before draining, cleaning or removing ash.

ONLY USE SUITABLE FIREWOOD

Use:

• Dry, untreated wood
• Kindling
• Proper firelighters

DO NOT USE:

• Petrol
• Spirits
• Liquid accelerants
• Rubbish
• Painted timber
• Treated timber

The hot tub is designed for outdoor use only and must never be used indoors or in an enclosed area.

AFTER USE

• Allow the fire, burner and all embers to cool completely.
• Only drain the hot tub once the burner is completely cold.
• Only clean the tub or remove ash once everything has cooled.
• Dispose of ash only when completely cool.
• Never move or disconnect the system while hot.

WATER & BATHER SAFETY

The recommended bathing temperature is 38°C.

Always check the water temperature before entering the hot tub.

The thermal bubble cover is designed for heat retention only and is not a child-safety cover.

Children must be closely supervised at all times and should never use the hot tub alone.

Do not use the hot tub while impaired by alcohol, drugs or anything else that may affect your ability to use the tub safely.

Pregnant users and anyone with relevant medical conditions should seek medical advice before using a hot tub.

COMMERCIAL & HOLIDAY-LET USE

For commercial or holiday-let installations, operators must complete a site-specific risk assessment and maintain a documented water-management system.

Where applicable, follow the relevant requirements for cleaning, water changes, disinfection and inspection, together with competent advice, suitable records and local authority requirements.

These guidelines do not replace the operator's own water-safety plan.

IMPORTANT

Failure to follow these guidelines may result in damage to the hot tub or burner and may create a serious safety hazard.